Box of 50 disposable 1804 or 1804S N95 Health Care Particulate Respirator and Surgical Masks
- 1804 Standard size
- 1804S Smaller size
This disposable N95 Health Care Particulate Respirator and Surgical Mask is designed to help provide quality, reliable respiratory protection for health care workers. CDC guidelines state N95 respirators may be used for M. tuberculosis exposure control. As a disposable particulate respirator, it is intended to help reduce wearer exposure to certain airborne particles including those generated by electrocautery, laser surgery, and other powered medical instruments. As a surgical mask, it is designed to be fluid resistant to splash and patter of blood and other infectious materials. 3M uses a variety of innovative technologies and features to help you meet your respiratory protection and comfort needs.
- NIOSH approved N95 rating
- FDA cleared for use as a surgical mask
- Fluid Resistance: 80 mmHg
- Flammability Rating Class I
- Adjustable nose clip
- V-shaped pleats
- Flat-fold style
Operating room personnel during surgical procedures to help protect both the surgical patient and the operating room personnel from transfer of microorganisms, body fluids, and particulate material.
Do Not Use for
- DO NOT use for gases or vapours (i.e. anaesthetic gases such as isoflurane or vapours from sterilants such as glutaraldehyde)
- DO NOT use in any manner not indicated in the User Instructions
Approvals and Standards:
- NIOSH approved N95 respirator
- Meets NIOSH 42 CFR 84 N95 requirements for a minimum 95% filtration efficiency against solid and liquid aerosols that do not contain oil.
- NIOSH approval number: TC-84A-7789
- FDA cleared for use as a surgical mask
- OSHA Assigned Protection Factor (APF) 10
- Bacterial Filtration Efficiency F2101 >99% BFE
- Australian TGA approved
- VFlex brand
Storage and Transportation
This Respirator has a shelf life of five (5) years. End of shelf life is marked on the product packaging. Before initial use, always check that the product is within the stated shelf life (use by date). Product should be stored in clean, dry conditions within the temperature range: - 20°c to + 30°C with a maximum relative humidity <80%. When storing or transporting this product use original packaging provided.
Contaminated products should be disposed as hazardous waste in accordance with local regulations. It is recommended that wearers be fit tested in accordance with AS/NZS 1715:2009 Standard. For information regarding fit testing procedures, please contact 3M.
Warnings and Use Limitations, always be sure that the complete product is:
- Suitable for the application;
- Fitted correctly;
- Worn during all periods of exposure;
- Replaced when necessary.
Proper selection, training, use and appropriate maintenance are essential in order for the product to help protect the wearer from certain airborne contaminants.
Failure to follow all instructions on the use of these respiratory protection products and/or failure to properly wear the complete product during all periods of exposure may adversely affect the wearer’s health, lead to severe or life threatening illness or permanent disability.
For suitability and proper, use follow local regulations, refer to all information supplied or contact an occupational hygienist, safety professional or 3M representative on the Tech Assist Helpline 3M Australia 1800 024 464, 3M New Zealand 0800 364 357.
Before use, the wearer must be trained in use of the complete product in accordance with applicable Health and Safety standards/guidance.
These products do not contain components made from natural rubber latex.
These products do not protect against all gases/vapours.
Do not use in atmospheres containing less than 19.5% oxygen. (3M definition. Individual countries may apply their own limits on oxygen deficiency. Seek advice if in doubt).
Do not use for respiratory protection against atmospheric contaminants/concentrations which are unknown or immediately dangerous to life and health (IDLH).
Do not use with beards or other facial hair that may inhibit contact between the face and the product thus preventing a good seal.
Leave the contaminated area immediately if:
- Breathing becomes difficult.
- Dizziness or other distress occurs.
Discard and replace the respirator if it becomes damaged, breathing resistance becomes excessive or at the end of the shift.
Never alter, modify or repair this device.
Be The First To Review This Product!
Help other Meddoc Pty Ltd users shop smarter by writing reviews for products you have purchased.